| 1. | Influence of backpressure on conrod big end fracture splitting
背压力对连杆裂解加工的影响规律
|
| 2. | The crank end of the connecting rod is sometimes called the rod " big end "
连杆的曲轴有时称为“大头” 。
|
| 3. | This is called the big end
这被称为连杆大头。
|
| 4. | Big end down
上小下大钢锭模
|
| 5. | The main bearing journals fit into the cylinder block and the big end journals align with the connecting rods
主要轴承曲颈安装在气缸体和与连杆大头末端匹配的曲颈上。
|
| 6. | The throw of the crankshaft , i . e . the distance between the main journal and the big end centers , controls the length of the stroke
曲轴的摆幅，即在主要曲颈和连杆大头末端中心之间的距离，控制着冲程的行程。
|
| 7. | We are one of the biggest end user of tantalite and columbite . we need the ores at the long - term . if you have the ores to sell , please contact us instantly
我们是中国最大的使用钽铌矿公司之一,我们长期需要钽矿和铌矿.如果你有这些矿石,请直接联系我们
|
| 8. | In the simulation , the mpc technique of msc . nastran is used to simulate the mechanical behavior of contact between the interfaces of piston pin and bearing of small end , crankpin and big end bearing , connecting rod body and bearing cap ; also constraints are applied to the connecting rod reasonably
分析中采用了patran中的多点约束( mpc )技术，有效地模拟了活塞销与小头孔内表面、曲柄销与大头孔内表面以及连杆体与大头盖接触面的力学接触状态，并对连杆进行合理的约束。
|
您当前位置：